Robotiq Copilot
Please Login to see the price
Finishing Copilot lets you program an external TCP. This tells the robot that the finishing tool is external to the robot, unlike in most cobot applications. The finishing task is then processed with the robot bringing the part to the external TCP.
Unbox Industry presents copilot by Robotiq. Finishing Copilot lets you program an external TCP. This tells the robot that the finishing tool is external to the robot, unlike in most cobot applications. The finishing task is then processed with the robot bringing the part to the external TCP.
Finishing Copilot:
- Save hours of programming
- Generate finishing trajectories in minutes
- Compensate for external tool wear
- Set an external tool center point
- Operate with any level of expertise
Finishing Copilot features:
- Set an external tool center point
- Find and apply contact offset
- Generate finishing paths with fewer than 10 waypoints
- Achieve 0.2-mm precision (same as Universal Robots)
- Find a surface
- Perform various insertions
- Hand-guide your robot
- Follow complex trajectories
- Edit point-to-point trajectories
- Apply constant force and define the stiffness for each axis
- Reset sensor values to zero
Easy to integrate, easy to use:- You don’t need a robotics background to use Finishing Copilot. Its intuitive programming interface guides you through the steps to set up an efficient finishing application.
Compensate for tool wear:- The contact offset node uses a point on the external tool as a reference to measure wear. Contact offset validates the tool’s exact position anytime you wish. If there’s a slight change, the robot program automatically adapts all related parameters.
Set an external tool center point:- Finishing Copilot lets you program an external TCP. This tells the robot that the finishing tool is external to the robot, unlike in most cobot applications. The finishing task is then processed with the robot bringing the part to the external TCP.
Validate part position:- The contact offset node uses reference points on the part to validate its position. If there’s a slight change, the robot program automatically adapts all related parameters.
Additional information
| Weight | 1 kg |
|---|---|
| Robotiq Copilot | Finishing Copilot UR E-Series, Force Copilot UR E-Series |
Robotiq_Finishing_Copilot_Manual 
